Tying Fly Line to Backing Nail Knot
- #1
Just purchased new fly line. What is the best knot to use when attaching fly line to your backing?
- #2
I just use a nail knot, I know there are many other ways but I like the simplicity of this one
- #3
yep, nail knot here as well.
casey
- #6
Did the fly line come with a loop on both ends? If it did, I use a perfection loop in the backing to attach it. If the fly line didn't have a loop, nail knots have always worked for me.
- #7
I ran a search on the net recently since the Airflo line I had just got in had welded loops on BOTH ends. Turns out, after my research, that the Albright was a great one to use. So that is the one I went with. Pretty easy to tie and should be rock solid.
- #9
I just bought 2 new fly lines. I also changed some fly lines from one reel to another and I used Albright knots even though some of the fly lines had welded loops.
I always used nail knots but I didn't trust this knot....especially for my 9 weight line for salmon, pike etc.
I was surprised at how slim an Albright knot really is.
I even used an Albright knot to tie flat shooting mono back line to a fly line. However, I had to make at least 10 wraps because anything under 8 wraps.....the mono would slip.
Last edited:
- #10
I recomend the Bimini Loop method as described in the Bimini thread, however, booth the Albright and Nail Knot are fine. If you employ the Nail Knot it must be a multi turn version (12 to 15 wraps) to distribute fully seated tension over an adaquit area of fly line to avoid coating stripping.
- #12
I fish freshwater, and a nail knot works fine for me. It's smooth and compact. If I were fishing saltwater, I'd go with the Albright I used to use. I did use a needle nail knot a couple times for backing, but that's just getting silly. 
- #13
When attaching backing to the fly line several things :icon_ques come into consideration. First is this a standard floating line or a solid core intermediate? Intermediate lines do not take well to some knots such as a nail knot.:frown: Secondly will you be changing that line at times when a sink tip or sinking line is needed for instance? If so then you'll want a quick change feature such as the loop to loop connection. When making the loop in that fly line do not just fold it over as the resulting bump may catch a guide with a fast running fish and cause a disaster. If your line has a braided core, either add a braided loop or strip the coating off and then make a loop in the braid such as is described in the web article, '' Getting Looped," by Dan Blanton. Always consider the breaking point of knots and the class tippet as this may save your fly line. Fly lines range from 12 lb test core in some very light lines to 30 lb test in the heavier ones, depending on the fly line and manufacturer. For those of you using Power Pro or similar braid backing, there are an entire set of rules/thoughts on securing that slick stuff and most involve a drop of Loctite 406 or something similar.
- #14
Hi Angelo:
I just use a Nail Knot, tied with a "Sip-Stir" straw from the grocery store, and cut to about an inch and a half long.
- #16
To me it depends, for me I rarely have to get to the backing, and use it mainly to fill in some space. A nail knot works perfectly fine and I imagine even if I went back that far it would still perform just fine.
- #17
Wait....you supposed to backing on a reel?
- #19
I use an Albright knot, which I find easier to tie than a nail knot.
- #20
I've always used a nail knot and a braided loop connector for everything from 6" trout to 15 lb redfish, Ive never had a any knot but the tippet knot fail on me.
Tying Fly Line to Backing Nail Knot
Source: https://www.theflyfishingforum.com/forums/index.php?threads/how-to-attach-backing-to-fly-line-best-knot.310393/